An audience reach report for an advertiser is a short note that goes out with the rate card and states the reach figures, the people they describe and how far they can be carried. On Takwimu Intelligence (TI) it is called the Reach note for an advertiser, and it exists so that the caveats travel with the number.
Key points:
- The note is short because the full report rarely gets forwarded.
- Whether its figures are ratings depends on how the sample was drawn.
- Daily radio reach and daypart reach describe the medium, and the station table shows where you stand inside it.
- Reached by radio and not by television is the figure a radio seller has that nobody else does.
- A method query is answered from the sampling design, the achieved sample and the weighting.
What goes in an audience reach report?
The note holds nine sections.
- How to read the figures overleaf.
- Interviews achieved.
- Daily radio reach.
- Radio reach at breakfast.
- Radio reach at drive time.
- Reached by radio and not by television.
- The station listened to most yesterday.
- How the people who answered compare with the population.
- The methodology.
That is everything a buyer needs to judge the number. Programme marks and reasons for leaving stay in the full report.
Why send a short note when a full report exists?
Numbers travel and reports do not. A planner pastes one figure into a media plan, and the method stays behind in a file nobody opens.
Sellers often strip the conditions to make a figure look stronger. That is the wrong instinct. A condition printed beside the number makes it safer to buy, because the buyer can defend it to their own client.
The pressure is real. The Communications Authority of Kenya's April 2026 report describes a gradual shift of advertising budgets towards digital channels "due to better targeting, measurability, and performance tracking". A broadcaster answers that with figures whose making can be shown.
Is this figure a rating?
The answer sits in the sampling design. The note opens by saying its figures describe the people who took part, and that whether they also describe the wider population depends entirely on how those people were selected.
If the design recorded on the study is a probability sample, the figures can speak for a population, and each shows its margin of error.
If it is a convenience or quota sample, they are not ratings. They describe respondents, they carry no margin of error, and the note says so in words. Such a study can still guide internal decisions. It should never be sold as a rating.
Whose reach is it: the medium's or the station's?
Read this section twice. It decides whether the note is used fairly.
| Figure in the note | What it measures | Belongs to |
|---|---|---|
| Daily radio reach | Listened to any radio yesterday | The medium |
| Radio reach at breakfast | Listening to any radio, 6am to 10am | The medium |
| Radio reach at drive time | Listening to any radio, 4pm to 7pm | The medium |
| Reached by radio and not by television | Listened and did not watch | The medium |
| Station listened to most yesterday | One main station per listener | Each station on the list |
Most of the note describes the pool. Sell the pool as the size of the market, then show your position in the station table. A deck that presents daily radio reach as one station's audience will fall apart the first time a planner reads the question.
How do you turn a percentage into people?
Multiply by the population the sample speaks for, and carry the margin through. Here is an invented example, for a county with 1,000,000 adults, on a probability design.
- Daily radio reach is 60%, with a margin of 4 points, so 560,000 to 640,000 adults listened yesterday, with 600,000 as the central figure.
- Your station is the main station for 25% of those listeners, which gives about 150,000 adults at the central figure.
Call that second number what it is. These are people whose main station yesterday was yours. Anyone who heard you and named another station as their main one sits outside it, so it is no measure of your full audience.
On a quota or convenience design, skip the multiplication. The percentages describe respondents, so there is no population to multiply by.
What does reached by radio and not by television tell a buyer?
This is the share who listened to radio yesterday and watched no television. It is the part of the population a television campaign cannot buy at any price.
It is a radio seller's strongest line. The CA's April 2026 report says free-to-air television commands the largest share of advertising expenditure, and calls radio "a critical complementary medium". A planner with most of the budget on television needs to know who that plan misses.
Cut it by age, area type or county to fit the brief. For a county buy, a county figure answers the question directly. Our guide to media planning in Kenya shows where this fits in a plan.
How should a buyer read breakfast and drive time?
Breakfast is the daypart advertising is priced from in almost every radio market. Drive time is the second peak, and it moves with how people travel.
Each figure counts people reached at some point in that band. It is no average quarter-hour figure, and the note does not present one. Some buyers' systems need average quarter-hour inputs. Say so early. A daypart figure relabelled to fit that box would be a different measurement under a familiar name.
Campaign frequency is a separate calculation again, and reach and frequency sets out how planners build it.
What does station share mean in a note?
Station share is the share of yesterday's radio listeners who listened to your station most. It comes from one question about one day, and it counts people.
Other sources use the word differently. In the UK, RAJAR's definition of share divides a station's hours by all radio hours in its area. Before setting two "share" figures side by side, check what each one divides. Our page on rating vs share has the detail.
Can a reach note be compared with other audience figures?
Only after four checks. Different sources in Kenya measure at different times in different ways, so a comparison has to be earned.
- Is the population the same, by age, area and date?
- Is the question the same, and does it ask about the same period?
- Is the sample design the same kind?
- Does "reach" mean the medium, the station or the programme?
If those differ, the note's own wording applies: this is a comparison between two different kinds of measurement. Tell the buyer that before they find out. Our page on who measures media audiences in Kenya sets out the main sources.
What happens when an advertiser asks how the figure was made?
They are asking for the sampling design, the achieved sample and the weighting. All three already exist on the study.
The pack sets fourteen days for a request for an audience figure or a methodology note. That time is for review, since nothing has to be assembled. Have someone senior read the answer before it goes.
A prompt, plain reply does more for a station's standing than a higher figure would. Our guide on how a station proves its reach to an advertiser covers the wider conversation.
What does a reach note not prove?
A reach note describes an audience. It says nothing about whether a particular spot ran, or who heard that spot.
Advert logs show spots. Recall surveys show people. Streaming logs show sessions. On-air responses show who chose to reply. Each is useful, and each stays in its own column. Adding them produces a larger number with no meaning.
How can a station measure advert recall?
The question bank holds two items for this. One asks whether the person remembers hearing or seeing any advertisement on the outlet they used most yesterday. The other asks which advertisers they remember from yesterday.
The second is unprompted, and that is the point. Prompted advertiser recall measures the prompt.
A sponsor who wants more than reach needs a design built for it. Our guide to sponsorship evaluation covers how.
How should a sales team use the note?
Keep the routine simple.
- Send the note whole, with every section in it.
- Lead with the market, then your position in the station table.
- Use reached by radio and not by television for any buyer already on television.
- Answer method questions from the study, in writing.
- Refresh the note with each wave, and date it.
What mistakes do sellers make with reach figures?
The same few errors come up.
- Quoting the medium's reach as the station's.
- Removing the opening section to save a page.
- Quoting a quota sample as a rating.
- Adding app sessions or SMS counts to a survey figure.
- Comparing the note with another source without the four checks.
- Setting a rate on a figure the buyer cannot trace.
Rates themselves are a commercial decision, and radio advertising rates in Kenya explains how they are set. A figure you can defend gives you a firmer footing in that talk.
Read next
- Audience measurement software for Kenyan media: the TI pack page for this work
- Audience research software for Kenyan media: all the pages in this section
- How a station proves its reach to an advertiser
- Media buying in Kenya: how it works
- The audience wave report on TI
- Takwimu Intelligence (TI) home page
- Audience measurement in Kenya: the guide to this library
- The TI platform and how we check our numbers
Where TI fits
A reach figure needs its conditions attached. TI builds the note from the study's own sample, weighting and methodology, and it says in plain words whether the figures are ratings.
To see it on your own station or title, book a walk-through.