Skip to content

guide

Audience research software for Kenyan media

One questionnaire about yesterday, weighted county figures and reports an advertiser can read, built for Kenyan radio, TV and newspapers.

Takwimu editorial team, Editorial team8 min read

Audience research software is the system a radio station, TV channel or newspaper uses to ask people what they heard, watched and read, then weight, analyse and report the answers. Takwimu Intelligence (TI) carries this work in its Media Audience pack, built for Kenyan outlets and the advertisers who buy from them.

Key points:

  • A station needs three separate facts: who could receive it, who tuned in, and what they thought.
  • TI measures audiences by asking people, with a questionnaire about yesterday and a prompted list of outlets.
  • Answers are weighted to KNBS census totals at the level where those totals exist, in practice the county.
  • Reports go to the people who use them: the programme controller, the advertiser and the regulator.
  • Reasons for leaving and staying are coded, so each finding reaches the department that owns it.

What is audience research in media?

Audience research is the study of who uses a media outlet, when, how often, and what they make of it. Audience measurement is the part that puts numbers on size. The rest explains those numbers.

Audience research methods fall into four families. Surveys ask people. Diaries have people write down what they use as they use it. Meters and panels record use. An outlet's own systems keep logs of streams, calls and messages.

Each family answers a different question. A stream log counts sessions on a server. A phone-in counts people who chose to call. Only a drawn sample can speak for a population.

Why do Kenyan outlets need their own audience research?

Market figures size the pool. The Communications Authority of Kenya (CA) publishes them in its Audience Measurement and Industry Trends Report of April 2026, which puts radio use in the last seven days between 73% and 75% over the four quarters to Q3 2025/26, while television slipped from 75% to 73%.

The same report says radio and television were each used daily by around 51% of the population in Q3 2025/26, and it counts over 200 radio stations. Those figures cannot tell a station how its breakfast show is doing in one county, why listeners left last month, or what a sponsor's money reached.

The CA also names "Measurement and Attribution Gaps" among the industry's challenges. Its report says limited integration between audience measurement and digital analytics "creates challenges in demonstrating full audience reach and campaign effectiveness to advertisers".

An advertiser buys a number somebody must be able to defend. That is the whole case for doing this properly.

What do bodies like RAJAR and BARC do?

Some markets settle the question with one joint body. Radio Joint Audience Research (RAJAR) was set up by the BBC and RadioCentre in 1992 so both could measure audiences on the same system, and it says it is owned and controlled by the industry it serves.

In India, the Broadcast Audience Research Council describes itself as a Joint Industry Body founded by stakeholder bodies for advertising agencies, broadcasters and advertisers. It gives its television panel as 180,000 individuals.

The lesson travels well. A figure earns its value from agreement on how it was made. Whoever produces it, the method has to be written down and open to the buyer.

How is audience research different from broadcast monitoring?

The two answer different questions. A broadcast monitoring system logs what went out on air. It cannot say who was listening. Audience research asks people, so it speaks to who heard and what they thought. TI keeps both, in separate columns, so a breakfast figure can be read against what was on air that morning. Our guide to media monitoring in Kenya sets out where one stops and the other starts.

A television audience measurement system, or TV rating system, answers the audience question for screens. People meters are one way to do it, and asking people about yesterday is another. Each has its own strengths, and each figure has to be read on its own terms.

What should audience research software measure?

Keep three facts apart.

Fact The question Where the evidence comes from
Coverage Who could receive it? Transmitter and engineering records, with signal complaints from the audience
Reach Who tuned in? Asking a sample of people about a specific recent day
Appreciation What did they think? Marks and reasons from the people who used it

Recall surveys, streaming logs, on-air responses and advert logs each measure different things. They must never be added together. A single "listenership" figure built from a survey, app sessions and SMS counts has no base, and any buyer who asks how it was made will find that out in one meeting.

Which audience research tools does TI use?

TI uses two instruments and keeps them apart.

The cross-media day-after recall questionnaire has 43 items. It asks about radio, television and news yesterday, with a prompted outlet list and time blocks. This is the reach instrument.

The programme panel has 7 items. It goes to people who have heard a programme and asks what they make of it and what they would change. It gives appreciation and diagnosis, and nothing from it is a reach figure.

Behind them sit 31 indicators. They include station share, daily and weekly reach for radio, television and newspapers, reach by daypart, days a week listened, reached by radio and not television, listened mainly over the internet or in a vehicle, the appreciation index, switched away mid-programme and left because of advertising. Two coding frames sort open answers into why an audience leaves and what holds an audience.

What audience research questions does a wave ask?

The wording stays plain, because the respondent is often on a phone or at a roadside. These are real items from the questionnaire. Our guide to audience survey questions explains why each is shaped the way it is.

  • Did you listen to the radio at any time yesterday?
  • Which stations did you hear yesterday?
  • Which one station did you listen to most yesterday?
  • Did you read a newspaper yesterday, on paper or on a phone?
  • In the last month, have you switched away from a station or channel part-way through a programme?
  • What keeps you with the station or channel you use most?

Which reports does a wave produce?

Four reports come from the same study. The Audience wave report says what one round of fieldwork found. The Programme performance report takes the schedule show by show. The Reach note for an advertiser is the short document that travels with a rate card. The campaign record sets out what a promotion campaign can show it contributed: the gap per place, every test with its verdict, and every recommendation with its decision and score.

Warnings sit beside the figures. They cover advert fatigue, signal problems, presenter problems, a schedule people cannot place, and a breakfast show smaller than the afternoon. Audience health stays as four separate readings: daily reach, strength across the dayparts, how the schedule is rated, and how much of the audience is lost part-way through a programme.

Pages in this section

Start here when planning work with TI.

Where TI fits

Audience figures must survive a buyer's questions. TI runs the questionnaire, weights the answers to KNBS census totals and issues reports that keep reach, appreciation and reasons apart, with their limits printed on them.

To see it on your own station or title, book a walk-through.

Takwimu Intelligence (TI) is audience measurement software for Kenyan media.

In this section

  1. Running an audience wave on TI

    Audience survey software for Kenyan media: how one wave goes from the outlet list to weighted figures, step by step.

  2. The audience wave report on TI

    What an audience wave report contains, section by section, and how an advertiser, a programme controller and a regulator should each read it.

  3. The programme performance report on TI

    A programme performance report shows who can place a show, how they mark it and why they leave, with the base printed first.

  4. A reach note for an advertiser on TI

    An audience reach report for an advertiser: a short note that goes out with the rate card and keeps the caveats beside the number.

  5. Why audiences leave a station or programme

    Why listeners switch stations comes down to nine causes, and each one belongs to a different department.

  6. The appreciation index: measuring what audiences think of a programme

    An appreciation index turns marks out of ten into a score for one programme. Here is how to calculate it and how far it can be compared.

  7. Audience health: the four readings every station should track

    Audience health rests on four readings: reach, the dayparts, how the schedule is rated, and what is lost part-way through a programme.

Sources

  1. 1

    Audience Measurement and Industry Trends Report, abridged version, April 2026 · Communications Authority of Kenya, April 2026Seven-day and daily media use to Q3 2025/26, radio genre and language, advertising window, industry challenges. Opened 5 November 2026.

  2. 2

    About RAJAR · RAJARWho set RAJAR up, when, and who owns it. Opened 5 November 2026.

  3. 3

    About BARC India · Broadcast Audience Research Council IndiaJoint Industry Body, its stakeholder bodies and stated panel size. Opened 5 November 2026.

More from the library