Reach and frequency are the two halves of any advertising schedule: reach is how many different people were exposed at least once, and frequency is the average number of times those people were exposed. Multiply them and you get the total weight of the campaign.
Key points:
- Impressions = reach × frequency, in people. GRPs = reach % × frequency, in percentages.
- Frequency is an average among people reached, so it hides who got what.
- Buying more of the same station adds frequency faster than reach.
- The right frequency depends on the message, and no single number holds everywhere.
- In advertising, frequency has nothing to do with a station's FM dial position.
What do reach and frequency mean?
The Marketing Accountability Standards Board defines frequency as the average number of exposures received by the part of a population that was reached. Note the base. People who saw nothing are left out of the average.
Barb's glossary says the same: the average number of times a commercial is seen by those in the target audience who see it at all. So a frequency of 2.4 means 2.4 among those reached.
The reach and frequency formula
Three lines cover almost every calculation.
Impressions = reach (people) × average frequency
Average frequency = impressions ÷ reach (people)
GRPs = reach (%) × average frequency
The first two come from the dictionary entry on frequency, and the third from its entry on gross rating points. Nielsen's radio terms state it the same way: gross impressions ÷ net reach = frequency.
A worked example
This example is invented, with round numbers. A county has 1,000,000 adults. A schedule delivers 1,200,000 impressions to 500,000 different people.
Reach is 500,000 ÷ 1,000,000 × 100 = 50%. Average frequency is 1,200,000 ÷ 500,000 = 2.4. Weight is 50 × 2.4 = 120 gross rating points.
Reach and frequency calculator: how to do it by hand
Impressions are easy. Multiply each slot's audience by the number of spots, then sum.
| Slot | Spots | Audience per spot | Impressions |
|---|---|---|---|
| Breakfast | 10 | 80,000 | 800,000 |
| Drive | 10 | 40,000 | 400,000 |
| Total | 20 | 1,200,000 |
The figures above are invented. Reach is the hard part, because a spot total cannot tell you how many listeners heard both slots. You need a survey that asks one person about both, which gives the overlap directly. A calculator that produces reach from spots alone is applying an assumption, so ask which one.
Average frequency hides the distribution
A frequency of 2.4 sounds like everyone heard the advert twice. Few did. Here is the same invented campaign, split by how often each group was exposed.
| Exposures | People | Impressions |
|---|---|---|
| 1 | 220,000 | 220,000 |
| 2 | 120,000 | 240,000 |
| 3 | 80,000 | 240,000 |
| 4 | 50,000 | 200,000 |
| 10 | 30,000 | 300,000 |
| Total | 500,000 | 1,200,000 |
Two findings stand out. Among people reached, 44% heard it once. Meanwhile a heavy-listening 6% took a quarter of all impressions.
The 3+ reach here is 160,000 people, or 16% of adults. That single line says more than the 2.4.
What is effective frequency?
Effective frequency is the idea that an advert needs a minimum number of exposures to work. The usual figure is three, and it has a long history. Herbert Krugman, in a 2000 paper, reinterpreted earlier data suggesting that three exposures were an optimal frequency.
Radio's trade body in the US carries the rule forward. The Radio Advertising Bureau recommends at least three exposures within a purchase cycle of four to eight weeks, with 2+ to maintain awareness, 4+ to build it and 6+ for complex messages.
Treat these as starting points. They come from other markets, other categories and other decades. A simple price offer may need fewer exposures than a new service that has to be explained, so test what your own message needs.
The reach and frequency curve
Spend more on the same schedule and reach rises quickly, then flattens. Each new spot lands increasingly on people who have already heard. Here is an invented curve.
| GRPs | Reach | Average frequency | Reach added |
|---|---|---|---|
| 100 | 40% | 2.5 | 40 points |
| 200 | 55% | 3.6 | 15 points |
| 300 | 63% | 4.8 | 8 points |
| 400 | 68% | 5.9 | 5 points |
The last 100 GRPs bought 5 points of reach. The first bought 40. Past the bend, a new station or daypart usually adds more than extra spots in the old one.
This is why spreading a budget works. A second station brings listeners the first could not reach.
When is reach worth more than frequency?
A launch, a public notice or a sale that ends on Saturday needs reach, because each person only has to learn one fact. A new product, or a message people must reason through, needs frequency.
Most schedules need both. Set the reach target first, then the frequency target. Multiply them and you have the GRPs to buy: 50% reach at a frequency of 3 is 150 GRPs.
One station or two? A worked plan
Here is an invented brief. A brand wants to reach 400,000 adults across one region, and can afford roughly 40 spots.
| Plan | Spots | Reach | Average frequency | GRPs |
|---|---|---|---|---|
| One station | 40 | 35% | 6.0 | 210 |
| Two stations | 20 on each | 48% | 4.0 | 192 |
The two-station plan gives up 18 GRPs and gains 13 points of reach. That is 52,000 more people hearing the message, at a frequency still above the usual target of three.
GRPs alone would have picked the wrong plan. This is the strongest reason to ask for reach.
How do you estimate frequency from days listened?
Survey answers can give a rough frequency for a daily spot. Take an invented listener who tunes in on 5 days a week and stays one hour of a three-hour block. Your spot runs once in that block each weekday.
On any given day, the chance of catching it is about one in three. Over five days that is 5 × 1 ÷ 3 = about 1.7 exposures a week. Two spots in the block would double it to about 3.3.
This is a planning estimate. It assumes the spot falls at a random point in the block, and that a listener who is tuned in hears it.
Frequency in advertising is not your FM frequency
Many Kenyans search for a radio frequency, such as a station's FM dial position in a given town. That is a transmitter setting in megahertz, and it decides where a signal can be received.
Advertising frequency is a count of exposures. The two meanings share a word and nothing else. Dial positions belong with radio coverage and signal.
Reach and frequency on Meta, TikTok and Google
Online advertisers ask the same question in the same two words. The arithmetic does not change: impressions ÷ reach = frequency. Google Ads describes its reporting as showing how many people were shown your ads and how frequently the same people saw them.
Those figures hold within one platform's own logs. They do not combine with a radio schedule's figures, because the two systems count different things in different ways. Report each channel on its own line.
Reach and frequency on Kenyan radio
The CA report of August 2026 describes radio as affordable, frequent and localised communication, particularly through vernacular stations. That suits frequency: a station whose listeners return daily can repeat a message cheaply.
Measuring it takes two inputs a station can collect by asking people: reach by daypart, and days a week listened. With those, a planner can see whether 20 spots will land on the same loyal group or spread wider. Both are easy to ask.
How too much frequency backfires
Repetition has a cost. A listener who hears the same advert ten times a day may leave, and the station loses too. The page on advertising load covers the warning signs.
Watch the top row of the distribution table. If a small group carries a quarter of your impressions, you are paying to annoy your heaviest listeners.
What should a reach and frequency report contain?
A useful report has six lines.
- The target population, with its source.
- Reach at 1+ and 3+.
- Average frequency among people reached.
- The share of impressions going to the heaviest group.
- Dates, stations and dayparts.
- Margins of error on the reach figures.
Takwimu Intelligence (TI) holds that a planner should demand the distribution every time. An average on its own can look healthy over a campaign that half the audience barely noticed.
Read next
- Audience measurement software for Kenyan media: the TI pack page for this work
- Audience metrics explained: reach, share, ratings and cost: all the pages in this section
- What is reach in media?
- Gross rating points (GRP)
- Cost per thousand (CPM)
- Takwimu Intelligence (TI) home page
- Audience measurement in Kenya: the guide to this library
- The TI platform and how we check our numbers
Where TI fits
Frequency only means something beside a measured reach. TI asks people which stations they used yesterday and in which time blocks, how many days a week they listen, and whether adverts made them leave. Its Reach note for an advertiser sets those figures out with a margin of error, so a planner can test a schedule before paying for it.
To see it on your own station or title, book a walk-through.